Services
 
       
 
 
   
  Well Testing Services » Three Phase Separators
  THREE PHASE SEPARATORS

The three phase separator are designed to separate an measure water, gas, and oil rates. The separators are equipment with internal components (inlet deflector, vane pack, coalecer, wave breaker, adjustable weir plates, and mist extractor) that facilitate and improve the phases separation and with complete instrumentation (reflief valves, level & pressure controllers, control valves, measuring equipment and safety devices) that allow us to provide our customers with accurate information concerning the well performance.

Separator sizes range from 15 MMcfd / 2,500 BPD to 150 MMCFD / 42,000 BPD All of our equipment has full traceability for each component, and are designed according ASME and NACE codes.

APPLICATIONS

 
  • Well testing
  • Well cleanups
  • Frac flow back
  • Pipe line cleaning / pigging
   
  FEATURES
 
  • Separators ANSI 300, 600, 900
  • Water and oil lines designed with by-pass lines, and measurement and control devices
  • Dual PSV (pressure safety valve system) with relief line to the back of the skid
  • High and low level alarms / pilots
  • High and low pressure alarms / pilots
  • Certified skid and crash frame for offshore operations
  • Mounted on trailers for onshore operations
   
  The vessel capacity depends on the following characteristics:
 
  • Composition and characteristics of the fluid that is going to be separate
  • Pressure and temperature conditions
  • Flow and gas rates
SEPARATOR CAPACITIES

SIZE
OD X S/S

WORKING
PRESSURE
PSI

LIQUID
CAPACITY
BPD

MAX. GAS
CAPACITY
MMCFD

24" X 10'

1,440

2,500

15

30" X 10'

1,440

5,000

30

40" X 10'

1,440

10,000

45

42" X 10'

2,160

10,000

65

42" X 10'

1,440

15,000

90

48" X 10'

1,440

20,000

100

52" X 10'

2,160

20,000

100

52" X 20'

2,160

42,000

150

   

Data Sheet  
Description Horizontal, Three phase Separator
Codes

ASME VII Div 1
NACE B.313
NACE M R-01-75
ISO 9001
DNV 2.7.1

ANSI 600
Nominal vessel size 52" OD S/S / 132cm OD x3.04 m S/S
Maximum Operation Pressure 1440 PSI / 9.93 Mpa
Gas rate capacity 100 MM cfd / 2.83 M Mm3/d
Liquid rate capacity 20,000 bbl/d / 3180 m3
Inlet 4" RF flange ANSI 600 / 4" Hammer union Fig. 602 Female
Gas outlet 3" RF flange ANSI 900 / 3 " Hammer union Fig. 602 Male
Oil outlet 3" RF flange ANSI 900 / 3 " Hammer union Fig. 602 Male
Water outlet 2" RF flange ANSI 900 / 2" Hammer union Fig. 602 Male
Aprox. Empty Weight 30,000 lbs. / 213,608 kg
Skid/frame dimensions( L x W X H) 17 X 8'6' X 9' / 5.18 m x 2.59 m x 2.74 m
 
ADDITIONAL INFORMATION  
Test unit fitted with:
deflector plate, coalescing plates, adjustable weir plate, and mist extractor. Gas leg with 6" and 2" Senior Daniels orifice meter, Mallard back pressure valve 3" oil leg with Mallard dump valves and turbine meters (1/2", 1",2",3"2") water leg with Mallard dum valve and turbine meters (1/2", 1",2"") two 3" x 4" relied valves.
  • Instrument gas scrubber.
  • Shrinkage tester
  • Inlet manifold with bypass
  • Barton chart recorder.
  • This unit can be equipped with the PTS wireless data acquisition unit.

 

 
 "Three Phase Separators "
 
  Other Services in this Category
 
» Flow Heads
» Surface Safety Valves
» ESD System - Emergency Shut Down
» Choke Manifolds
» Data Headers
» Sand Separators
» Steam Heat Exchangers
» Steam Generators
» Line Heaters
» 4 Phase Separator
» 3 Phase Separator
» Surge Tanks
» Gauge Tanks
» Sand Traps
» Transfer Pumps
2. Early Production Facilities
3. Extended Well Testing
4. Oil & Gas Burners
» High Efficiency Burners
» Conventional Burner
5. Water Treatment
6. Real Time Data Acquisition
   
   
   
   
   
 
   
   
  Quick links   Equipment   Services
 
  About Us
Contact Us
Locations
Careers
  Downhole Tools
Sub Sea Tools
Surface Equipment

  Well Testing Services
Frac Flow back and Well Clean-up
Drill Stem Testing (DST)
Perforating Services (TCP)
Subsea Intervention / Landing String Assy
Wireline Services
Pipe Line Services
Production Facilities
Real Time Data Acquisition